• By Euro Pratik
• Posted December 21th, 2023

Fluted Panels Installation Made Simple: Comprehensive DIY Guide

Modern homes can benefit greatly from the luxurious elegance that fluted panels can add to their design. These panel’s beauty and exceptional durability can boost your décor.

For elegance and appreciation-worthy looks, one must install the panels correctly. The installation is pretty simple and easy we promote DIY (Do It Yourself).

MIGA Louvers are easy to install with a simplistic shiplap system with a rabbat joint which is easier than a tongue and groove interlocking system.

You don't need to worry; we've provided step-by-step instructions to explain how to install fluted panels on the wall. In this manual, we'll go over a few simple techniques for installing fluted panels perfectly.

6 Easy Steps To Install Fluted Panels At Home

1. Measure and Plan

You must ascertain the appropriate panel's dimensions before installing fluted panels. That's why, you must precisely measure the installation area. The height, and width of the should be taken into consideration when choosing a panel layout.

2. Prepare the Panels

It is important to inspect the panels properly before installation to achieve the perfect appearance. For this reason, examine the fluted panels carefully and mark any imperfections such as scratches or dents. Clean the panels thoroughly so that there is no dust or debris left on them.

3. Prepare the Surface

After preparing the panels, the following step is to clean the area where the fluted panels will be put.

Prepwork with plywood / MDF is recommended before mounting the wall panel.

Please remove any kind of wallpaper/film on the surface of the base. Do examine the surface for cracks, holes, and uneven surfaces.

4. Mounting Options

Since it is a DIY concept-based product, the mounting process is really easy!

Adhesive:

Apply quality silicon adhesive on the back of the fluted panel. This offers greater stability and increases the panel's longevity.

If need be, one can also put headless nails using an air tacker/staple gun in between the grooves of the panels.

5. Mounting the Panels

Mark reference points during installation so you can determine the correct orientation of the fluted panels.

Panels can be installed in both vertical or horizontal directions. To enjoy seamless designs, connect the louver to the groove.

One can also apply a minimum amount of glue gun (hot melt) on the back of the panels or air tacker to increase instant adhesion.

For better fixing you can also use headless nails on the tongue / interlocking space.

6. Finish and Cleanup

After installation, allow time for the adhesive to set and do not tamper with the design. Once all the panels are properly arranged, you can add the finishing touches by smoothing out the edges. If you notice any uneven edges or surfaces, you can level them using the appropriate tools and excess length can be cut using a circular saw.

Conclusion

By following the above steps you can perfectly install fluted panels in your home for creating an absolutely stunning decor. But you must remember that your safety is the first priority, therefore, stick to the safety guidelines during the whole procedure. If you have any doubt regarding the installation of fluted panels, then, you must consult with a fabricator or with the manufacturer.

Don’t worry, we’ve got you covered. You can also refer to this link for understanding the installation process of our wall panels –

https://www.youtube.com/watch?v=jjInE10mxNs